Wood Patch
Support Documents
PDS GHS SDSCaution
May cause slight irritation to individuals with sensitive skin. Wash thoroughly after use.
Warning
This product contains a chemical known to the State of California to cause cancer.
Keep out of reach of children.
Do not take internally.
Description
A non-flammable, waterbased product designed to quickly and easily fill in large holes, cracks and gouges in wood. It sands easily, is flexible and adheres well to wood. It also absorbs stains similarly to wood.
Directions
SURFACE PREPARATION: Surface must be free of dust, oil, wax and moisture.
Application
- Apply with a putty knife or trowel.
- Press patch into nail holes or minor imperfections keeping product slightly higher than the surface. Fill deep areas in layers while allowing ample time for each layer to dry.
Clean-Up
Clean with water while Wood Patch is still damp.
Storage
Keep containers tightly closed. Keep from freezing. If freezing occurs, thaw at room temperature for a minimum of 8 hours before using.
Available In
| Type | Size | Prod. No. | Qty | PDS | GHS SDS |
|---|---|---|---|---|---|
| RED OAK | GAL | 83211000 | 2 | PDS | SDS |
| MAPLE ASH PINE | GAL | 83212000 | 2 | PDS | SDS |
| WHITE OAK | QT | 83207000 | 6 | PDS | SDS |
| RED OAK | QT | 83208000 | 6 | PDS | SDS |
| MAPLE ASH PINE | QT | 83209000 | 6 | PDS | SDS |
| WHITE OAK | GAL | 83210000 | 2 | PDS | SDS |
Physical Properties
| Density (lbs/gal) | 14.1 |
| % Solids | 73 |
| Viscosity - CPS | 1,160,000 |
| pH | 8.4 |
| VOC (b/l) | 0 |
| Flash Point | N/A |
Health/Safety
| HMIS Rating | |
|---|---|
| Health | 1 |
| Flammability | 1 |
| Reactivity | 0 |