Quick Coat 2-Hour Penetrating Finish

Support Documents

PDS GHS SDS

CAUTIONS: CONTAINS ALIPHATIC HYDROCARBONS

Contents are COMBUSTIBLE. Keep away form heat, sparks and open flame.

VAPOR HARMFUL

Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area.

Avoid contact with skin and eyes. Wear rubber gloves and safety glasses when handling. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage.

FIRST AID

In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician.

If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.

DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE

Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal.

WARNING

This product contains chemicals known to the State of California to cause cancer and birth defects or reproductive harm.

DANGER

Rags, steel wool and other waste soaked with oil finishes may spontaneously catch fire if improperly discarded. Place rags, steel wool and other waste immediately after use in a sealed, water-filled container. Dispose of in accordance with local fire regulations.

WARNING

Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper lead containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.

KEEP OUT OF REACH OF CHILDREN.

DO NOT TAKE INTERNALLY.

FOR PROFESSIONAL USE ONLY.

DESCRIPTION

DuraSeal^® Quick Coat Penetrating Finish is a semi-transparent stain formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal^® Quick Coat Penetrating Finish is available in existing DuraSeal^® colors as well as many Certified Minwax^® colors. It can be used with or without a finish coat, and is compatible with all DuraSeal^® water-borne and oil-modified finish systems.

SURFACE PREPARATION

Properly prepare floor according to NWFA specifications. Use a No.100 grit screen for the final screening cut.
Remove all dust with a vacuum and tack surface with a clean cloth moistened with mineral spirits.

APPLICATION

Shake material thoroughly before and occasionally during use. Apply to a small test area before proceeding with the entire job to ensure desired color. If desired, DuraSeal^® Quick Coat Penetrating Finish #110 Neutral can be used to lighten any standard DuraSeal^® wood tone.
Apply the first coat of DuraSeal^® Quick Coat Penetrating Finish liberally with a brush, lambswool applicator or cloth at approximately 500 square feet per gallon.
Allow to penetrate for 5-8 minutes, then remove excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat.
If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat (step 3 above).
Allow the final coat to dry at least 2 hours and apply a DuraSeal^® finish coat of your choice.

IMPORTANT

Place rags, steel wool and other waste immediately after use in a sealed, water-filled metal container. See cautionary statement

DRY TIME AND CURE

Approximately 2-3 hours. Note: Dry time is based on conditions of 77° and 50% relative humidity.

COVERAGE

First coat – approximately 500 square feet per gallon. Optional second coat – approximately 800 sq.ft. per gallon.

CLEAN UP

Application tools should be cleaned with mineral spirits or paint thinner immediately after use.

SOLVENT

Non-photochemically reactive.

MAINTENANCE

Regularly remove dust and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintain floors sealed only with DuraSeal^® Quick Coat Penetrating Finish with DuraSeal^® Renovator Cleaner and Reconditioner.

STORAGE

Store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing.

AVAILABLE IN

TYPE	SIZE	PROD. NO.	QTY	PDS	GHS SDS
TRUE BLACK	QT	861990000	12	PDS	SDS
HERITAGE BROWN	QT	861860000	4	PDS	SDS
AGED BARREL	QT	861850000	4	PDS	SDS
DARK GRAY	QT	861840000	4	PDS	SDS
WARM GRAY	QT	861830000	4	PDS	SDS
RUSTIC BEIGE	QT	861820000	4	PDS	SDS
SILVERED GRAY	QT	861810000	4	PDS	SDS
JACOBEAN	QT	861750000	12	PDS	SDS
ESPRESSO	QT	861730000	12	PDS	SDS
CLASSIC GRAY	QT	861720000	4	PDS	SDS
DARK WALNUT	QT	861710000	12	PDS	SDS
WEATHERED OAK	QT	861700000	4	PDS	SDS
GUNSTOCK	QT	861500000	12	PDS	SDS
GOLDEN PECAN	QT	861450000	12	PDS	SDS
SEDONA RED	QT	861430000	12	PDS	SDS
FRUITWOOD	QT	861410000	12	PDS	SDS
COLONIAL MAPLE	QT	861400000	12	PDS	SDS
ROSEWOOD	QT	861390000	12	PDS	SDS
SPICE BROWN	QT	861370000	12	PDS	SDS
CHERRY	QT	861350000	12	PDS	SDS
ENGLISH CHESTNUT	QT	861330000	12	PDS	SDS
EBONY	QT	861310000	12	PDS	SDS
EARLY AMERICAN	QT	861300000	12	PDS	SDS
MEDIUM BROWN	QT	861280000	12	PDS	SDS
RED MAHOGANY	QT	861250000	12	PDS	SDS
SPECIAL WALNUT	QT	861240000	12	PDS	SDS
COFFEE BROWN	QT	861230000	12	PDS	SDS
MESQUITE	QT	861220000	12	PDS	SDS
GOLDEN BROWN	QT	861210000	12	PDS	SDS
ANTIQUE BROWN	QT	861160000	12	PDS	SDS
GOLDEN OAK	QT	861120000	12	PDS	SDS
PROVINCIAL	QT	861110000	12	PDS	SDS
NEUTRAL	QT	861100000	12	PDS	SDS
ROYAL MAHOGANY	QT	861080000	12	PDS	SDS
CHESTNUT	QT	861040000	12	PDS	SDS
NUTMEG	QT	861020000	12	PDS	SDS
TRUE BLACK	GAL	811990000	6	PDS	SDS
HERITAGE BROWN	GAL	811860000	4	PDS	SDS
AGED BARREL	GAL	811850000	4	PDS	SDS
DARK GRAY	GAL	811840000	4	PDS	SDS
WARM GRAY	GAL	811830000	4	PDS	SDS
RUSTIC BEIGE	GAL	811820000	4	PDS	SDS
SILVERED GRAY	GAL	811810000	4	PDS	SDS
JACOBEAN	GAL	811750000	6	PDS	SDS
ESPRESSO	GAL	811730000	6	PDS	SDS
CLASSIC GRAY	GAL	811720000	4	PDS	SDS
DARK WALNUT	GAL	811710000	6	PDS	SDS
WEATHERED OAK	GAL	811700000	4	PDS	SDS
GUNSTOCK	GAL	811500000	6	PDS	SDS
GOLDEN PECAN	GAL	811450000	6	PDS	SDS
SEDONA RED	GAL	811430000	6	PDS	SDS
FRUITWOOD	GAL	811410000	6	PDS	SDS
COLONIAL MAPLE	GAL	811400000	6	PDS	SDS
ROSEWOOD	GAL	811390000	6	PDS	SDS
SPICE BROWN	GAL	811370000	6	PDS	SDS
CHERRY	GAL	811350000	6	PDS	SDS
ENGLISH CHESTNUT	GAL	811330000	6	PDS	SDS
EBONY	GAL	811310000	6	PDS	SDS
EARLY AMERICAN	GAL	811300000	6	PDS	SDS
MEDIUM BROWN	GAL	811280000	6	PDS	SDS
RED MAHOGANY	GAL	811250000	6	PDS	SDS
SPECIAL WALNUT	GAL	811240000	6	PDS	SDS
COFFEE BROWN	GAL	811230000	6	PDS	SDS
MESQUITE	GAL	811220000	6	PDS	SDS
GOLDEN BROWN	GAL	811210000	6	PDS	SDS
ANTIQUE BROWN	GAL	811160000	6	PDS	SDS
GOLDEN OAK	GAL	811120000	6	PDS	SDS
PROVINCIAL	GAL	811110000	6	PDS	SDS
NEUTRAL	GAL	811100000	6	PDS	SDS
ROYAL MAHOGANY	GAL	811080000	6	PDS	SDS
CHESTNUT	GAL	811040000	6	PDS	SDS
NUTMEG	GAL	811020000	6	PDS	SDS
COUNTRY WHITE	GAL	811010000	4	PDS	SDS

PHYSICAL PROPERTIES

Density (lbs/gal)	6.9 – 7.5
% Solids	33 – 42
Viscosity – CPS	22 – 65
VOC	550 g/l or 4.6 lb/gal max.