Warranty

DURA SEAL™ Penetrating Finish (Stain)

PRODUCT MSDS
  Penetrating Finish (Stain) - Material Safety Data Sheet

PRODUCT DESCRIPTION:
DURA SEAL™ Penetrating Finish is a semi-transparent stain formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Available in colors to match any decor, DURA SEAL™ Penetrating Finish creates a bond with the wood that won't scratch or wear away. Can be used with or without a finish coat.

DIRECTIONS:
Surface Preparation:
1. Properly prepare surface according to NOFMA or NWFA approved methods.
2. Use a No. 100 grit screen [80 grit for 201 White] for the final sanding cut.
3. Remove all dust with a broom and/or vacuum and tack surface with a clean towel moistened with mineral spirits.

Application:
1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on a small inconspicuous area before proceeding with entire job. If desired, DURA SEAL™ Penetrating Finish #210 Neutral can be used to lighten any standard Penetrating Finish color.
2. Apply the first coat of DURA SEAL™ Penetrating Finish liberally with a brush, lambs wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
3. Allow to penetrate for 5 - 8 minutes then remove excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time.
4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
NOTE: A second coat of DURA SEAL™ Penetrating Finish is not recommended with 350 VO.C. compliant material.
5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice.
NOTE: For heavy traffic commercial applications, it is recommended that DURA SEAL™ Penetrating Finish be used without a finish coat, and periodically maintained with DURA SEAL™ Renovator Cleaner and Reconditioner.

PRECAUTION: Do not use steel wool when using DURA SEAL™ Penetrating Finish #201 White.

IMPORTANT: Immediately after use, place rags, steel wool and other waste in a sealed, water filled metal container. See cautionary statement.

CAUTION:
COMBUSTIBLE MIXTURE N.Y.F.D. C. OF A. NO.1187

KEEP OUT OF REACH OF CHILDREN.

PRODUCT PROPERTIES:

DANGER:
Contains mineral spirits. Harmful or fatal if swallowed. Do not take internally. Skin irritant. Avoid contact with skin and eyes. Wear rubber gloves and safety glasses when handling. Avoid inhalation and use only with adequate ventilation. If adequate ventilation cannot be maintained, wear respiratory protection [NIOSH/MSHA TC23C or equivalent] or leave the area. Do not use or store near heat, sparks, flame or other sources of ignition. Close container after each use.

DANGER:
Rags, steel wool or waste soaked with DURA SEAL Penetrating Finish may spontaneously catch fire if improperly discarded. Immediately after use, place rags, steel wool, and other waste in a sealed, water filled metal container. Dispose of in accordance with local fire regulations.

FIRST AID:
If swallowed, DO NOT induce vomiting. CALL PHYSICIAN IMMEDIATELY. For skin contact, wash thoroughly with soap and water. If irritation persists, get medical attention. If affected by inhalation, remove to fresh air and CALL PHYSICIAN. In case of eye contact, immediately flush eyes thoroughly with water, then remove any contact lenses. Continue to flush eyes with water for at least 15 minutes. If irritation persists, CONTACT A PHYSICIAN.

4/30/99
lit # D5990015