DuraSeal® Gymthane® Finish 450

Support Documents

PDS GHS SDS

Caution

COMBUSTIBLE MIXTURE N.Y.F.D. C. OF A. NO. 1187

Danger

Contains mineral spirits. Harmful or fatal if swallowed. Do not take internally. Skin irritant. Avoid contact with skin and eyes. Wear rubber gloves and safety glasses when handling. Avoid inhalation and use only with adequate ventilation. If adequate ventilation cannot be maintained, wear respiratory protection (NIOSH/MSHA TC23C or equivalent) or leave the area. Do not use or store near heat, sparks, flame or other sources of ignition. Close container after each use.

First Aid

If swallowed, do not induce vomiting, CALL PHYSICIAN IMMEDIATELY. For skin contact, wash thoroughly with soap and water. In case of eye contact, IMMEDIATELY flush eyes thoroughly with water, then remove any contact lenses. Continue to flush eyes with water for at least 15 minutes. If irritation persists, get medical attention. If irritation persists, get medical attention. If affected by inhalation, remove to fresh air and CALL PHYSICIAN.

Description

A superior quality, high gloss polyurethane finish designed specificaily for gymnasium floors. The DuraSeal® Gymthane® Sealer and Finish System resists rubber marks and scuffing and is easily maintained.

Directions

Preparation

  1. Properly prepare surface according to NWFA approved methods. Screen using No. 100 disc for final cut.
  2. Remove all dust with a broom and/or vacuum and tack surface with a clean cloth moistened with mineral spirits.

Sealer Application

  1. Apply one coat of GYMTHANE Sealer with a lambswool applicator at a coverage rate of 500 square feet per gallon.
  2. Allow to dry thoroughly.
  3. Screen using No. 100 disc.
  4. Tack with a clean cloth moistened with mineral spirits to remove all dust.

Gameline Application

  1. Apply Gameline paint according label directions.
  2. Allow paint to dry thoroughly.
  3. Abrade paint according to label directions.
  4. Tack with cloth dampened with water to remove dust.

Finish Application

  1. Apply first coat of GYMTHANE Finish 450 with a lambswool applicator at a coverage rate of 500 square feet per gallon.
  2. Allow to dry at least 8 hours.
  3. Screen with No. 100 disc screen.
  4. Tack with a clean cloth moistened with mineral spirits to remove all dust.
  5. Apply a second coat of GYMTHANE Finish 450 in the same manner as the first.

Drying Time

Approximately 8 hours. Allow to dry overnight for light traffic; 48 hours for heavy traffic. Note: Drying time will be increased by high humidity, low temperature, lack of air movement or applying too heavily.

Coverage

Approximately 500 square feet per gallon.

Maintenance

Sweep or dry dust mop floors daily. Stubborn rubber marks and stains may be removed using DuraSeal® Hardwood Floor Cleaner™ according to label directions. Occasional buffing with a polishing machine will renew luster.

Available In

Type Size Prod. No. Qty PDS GHS SDS
5 GAL 85322000 1 PDS SDS

Solvent

Non-photochemically reactive.

NON VOLATILE CONTENT 50%
RESISTANCE TO SKINNING NO SKINNING
COLOR- NO.6 GARDNER
DRY FILM COLOR CLEAR
PACKAGE STABILITY NO SEDIMENT, NO DARKENING
FLASH POINT 109°F
DRY TIME DRY TO TOUCH LESS THAN 3 HOURS
DRY HARD 7 HOURS
NO TACK AFTER 24 HOURS
ABRASION RESISTANCE  
SAND TEST >130
HEEL TEST EXCELLENT
JAMES MACHINE <1%
COEFFICIENT 0.5
FLEXIBILITY PASSES 1 /8" MANDRELL BEND